Get everything you want in a custom form and
When it comes to continuous forms, our flexibility is our strength. You
can choose from a wide variety of papers available in both carbonless and carbon
interleaved. Custom inks are also available.
If you need to add additional perforations,
numbering, MICR, punching or even special packing.
Bond papers with one-time carbons are interleaved into continuous forms.
Carbons may be either blue or black, standard
grade medium intensity. Black carbons are recommended for machine use.
Carbonless papers (often referred to as NCR paper) can also be provided.
Carbonless papers use two chemical coatings
(capsules), one on the face the other on the back of a sheet of paper. When
pressure is applied (ie: handwriting, typing or machine impact) the two
capsules interact and create an image.
Forms must be engineered so that papers are
properly in position.
- Part 1 of a form set would most often use a
coated back sheet - CB
- Inside parts would contain a coating on both
the front and the back - CFB
- The Last part only need have a coating on the
face - CF
Form Sizes: Form sizes available are 3 1/2", 3 2/3",
4 1/4", 5 1/2", 5 2/3", 7", 7 1/3", 8 1/2",
11" and 14".
Ink: One or more ink colors may be used. If a PMS match color
is needed, we will print in the ink color requested.
Marginal Words: Marginal words such as "Customer's Copy, File
Copy," etc., to denote disposition of parts will be printed in one line of
our standard 10-point type. Type is not more than four inches long. Color
optional with factory.
Perforations: Horizontal "crash" perforations are between
sets, through both paper and carbon. Vertical perforations are 1/2 inch from the
edge of the sheet on each side of the form for removal of line-hole punched
margins. (This can be omitted if requested.)
Line-Hole Marginal Punching: Punching is through paper along both sides
of the forms. Size 5 /32" holes are spaced 1/4" from the edge of the
sheet to the center of the hole and are spaced 1/2 inch center-to-center
Construction: Multiple-copy forms are assembled with non-processed
carbon between parts, running between the marginal holes in the paper. Paper and
carbon are held in place by means of "crimping" every 2 inches along
either or both sides and by the horizontal "crash" perforation between
sets. Special fastenings, such as glue, interrupt and taping, are also
Packing: Uniform quantities are fold-packed in corrugated cartons of
convenient size. Label shows complete information as to quantity, form number,
form name and numbers contained in the carton.